PTFE HOSE
Fluoropolymers and especially virgin PTFE have excellent physical and chemical properties. The chemical resistance is nearly overall with only a few limitations.
Without braid, tubing can withstand around 10 bar, depending on the diameter. For more pressure and security, an overboard or a rubber hose will be adapted.
Without braid, tubing can withstand around 10 bar, depending on the diameter. For more pressure and security, an overboard or a rubber hose will be adapted.
COMPOSITE HOSE
Manufactured with multiple layers of nylon fabrics and films, the composite hose is designed to transport oil, gas, cryogenic medium and vapor recovery. They are light, easy to handle and cheaper than any other hose the same size.
A layer of PTFE can be added for the toughest application. The inner and outer wire will be in carbon steel, stainless steel or polypropylene cover.
A layer of PTFE can be added for the toughest application. The inner and outer wire will be in carbon steel, stainless steel or polypropylene cover.
METALLIC HOSES
There are many components in a metal hose assembly and care should be taken when selecting each of them. Moreover, the components have their own unique technical limitations so it is important to make sure each of the components is compatible with your application. In much the same way as a “chain is as strong as its weakest link”, a metal hose assembly will only perform to the limits of its weakest component.
To properly design a metal hose assembly for a particular application, the following design parameters must be determined.
To properly design a metal hose assembly for a particular application, the following design parameters must be determined.
- Size – The diameter of the connections in which the assembly will be installed is needed to provide a proper fit. This information is required.
- Temperature – As the temperature to which the assembly is exposed (internally and externally) increases, the strength of the assembly’s components decreases. Also, the coldest temperature to which the hose will be exposed can affect the assembly procedure and/or fitting materials. If you do not provide this information it will be assumed that the temperatures are 70oF.
- Application – This refers to the configuration in which the assembly is installed. This includes both the dimensions of the assembly as well as the details of any movement that the assembly will experience. This information is necessary to calculate assembly length and required flexibility.
- Media – Identify all chemicals to which the assembly will be exposed, both internally and externally. This is important since you must be sure that the assembly’s components are chemically compatible with the media going through the hose as well as the environment in which the hose is installed. If no media is given, it will be assumed that both the media and the external environment are compatible with all of the available materials for each component.
- Pressure – Identify the internal pressure to which the assembly will be exposed. Also, determine if the pressure is constant or if there are cycles or spikes. This information is important to determine if the assembly is strong enough for the application. If no pressure is given it will be assumed that the pressure is low and there are no pressure surges or spikes.
- End Fittings – Identify the necessary end fittings. This is required since fittings for the assembly must be chosen to properly fit the mating connections.
- Dynamics – Identify the velocity at which the media will flow through the assembly. Since corrugated metal hose does not have a smooth interior, rapid media flow can set up a resonant frequency that will cause the hose to vibrate and prematurely fail. If no velocity is given, it will be assumed that the velocity is not fast enough to affect the assembly’s performance.
Quality Products |
As beneficiary of five manufacturer plants, KENOVEL has the capacity to supply top quality industrial and technical products, meeting the needs of domestic markets, but also exporting all over Europe, North Africa, Africa, South America, Emirates, Russia…
Our products applies to a wide rage of industrial manufacturers as marine, petrochemical, refining, power plants, pharmaceutical, LNG, or food industry. We are able to meet the toughest certification requirement or have in house control test by a fully certified notified body.
The quality of product is implemented strictly according to high educated and trained people and quality renowned suppliers. The developing objectives of our company are pursuit of excellence and to become one of the leaders of the industry in our area zone. It relies on time shipment and quality material.
Our products applies to a wide rage of industrial manufacturers as marine, petrochemical, refining, power plants, pharmaceutical, LNG, or food industry. We are able to meet the toughest certification requirement or have in house control test by a fully certified notified body.
The quality of product is implemented strictly according to high educated and trained people and quality renowned suppliers. The developing objectives of our company are pursuit of excellence and to become one of the leaders of the industry in our area zone. It relies on time shipment and quality material.
QUALITYWe do not compromise with quality! Each product is chosen with the greatest care, among the best manufacturers and treated with know-how in our workshops.
|
SOLUTIONTo each problem a solution! We are equipped with high-end equipment, a competent team and suppliers of choice.
|
SERVICEWe accompany our customers in their research, their engineering but also after the sales. There is a qualified contact at your service at each step of your journey.
|